48 Cavities Preform Mould

48 Cavities Preform Mould

The 48-cavity configuration produces 48 PET preforms in each injection cycle, increasing output per cycle and supporting large-scale manufacturing requirements.
Cavity spacing can be designed to match the gripper pitch of standard side-entry take-out robots, commonly 38 mm or 50 mm. This allows the robot to collect all 48 preforms in one synchronized movement without additional position adjustments.
Coordinated cavity layout and robot gripper positioning help shorten the demoulding cycle and improve automation efficiency. Under suitable machine and robot configurations, take-out time can be optimized to below 2 seconds.
Accurate cavity positioning and machining tolerances help maintain consistent preform dimensions, neck finish, and product quality across all 48 cavities.
Send Inquiry
Description
Technical Parameters

48 Cavities PET preform mould built with balanced hot runner and efficient cooling circuit for steady mass production. Machined from premium hardened steel, it delivers consistent preform weight and concentricity across all cavities. Suitable for water, beverage and edible oil bottle preforms. It runs reliably on standard injection machines, keeps low reject rate and long service life, with neck finish and preform specs customizable to match your blow moulding line.

 

48 Cavities Preform Mould: Advanced Thermal Management and Cooling Design

48 Cavities Preform Mould

 

The 48 Cavities Preform Mould is designed with independent temperature regulation and dedicated cooling structures to maintain consistent processing conditions across all cavities.

1. Four-Zone Hot Runner Temperature Control
The hot runner system is divided into four independently controlled zones: inner ring, middle ring, outer ring, and manifold body. Each zone is equipped with dedicated thermocouples and heaters, allowing separate temperature adjustments according to different thermal requirements.

2. Independent Thermal Compensation
Separate temperature monitoring helps compensate for heat loss variations between different areas of the mould. This improves temperature consistency throughout the hot runner system and supports stable melt distribution during continuous production.

3. Double-Wall Cooling Channel Structure
Gun-drilled double-wall cooling channels are integrated into the cavity plates, with cooling passages positioned close to the cavity surfaces. This design improves heat transfer efficiency and helps maintain stable cavity temperatures.

4. Consistent Thermal Performance
The combination of zoned heating and targeted cooling helps control temperature fluctuations, supporting repeatable moulding conditions and reducing the risk of extended cycle times during long production runs.

Get Your Tooling Quote in 24h

48 Cavities Preform Mould: Spare Parts and Maintenance Support

48 Cavities Preform Mould: Spare Parts and Maintenance Support

Essential Spare Components

The standard spare parts kit includes valve pins, nozzle tips, heating elements, and sealing components for replacement during routine servicing or unexpected maintenance.

48 Cavities Preform Mould: Spare Parts and Maintenance Support

Component Identification Drawing

A color-coded component layout drawing identifies the installation positions of individual parts, helping maintenance personnel locate the required components efficiently.

48 Cavities Preform Mould: Spare Parts and Maintenance Support

Simplified Maintenance Procedures

Clearly identified spare parts and corresponding layout references make component inspection and replacement more straightforward, reducing the time required for maintenance operations.

48 Cavities Preform Mould: Spare Parts and Maintenance Support

Long-Term Production Support

Providing essential replacement components with the mould helps customers prepare for scheduled servicing, minimize maintenance delays, and maintain production readiness throughout the mould's operating life.
Why Choose SZ-MOLDTECH (Jiaxing) Co., Ltd.?

01. Established Manufacturing Experience

With over 20 years of PET preform mould manufacturing experience, we understand the technical requirements of different preform designs and injection moulding applications.

Our 6,000 m² manufacturing facility and 76 employees provide the production resources needed for customized mould projects.

02. Multiple Cavity Configuration Options

We manufacture PET preform moulds in 48, 72, 96, 128, and 144-cavity configurations to accommodate different machine capacities and production targets.

Our product range covers hot halves, cold halves, cores, cavities, neck rings, and related mould components.

03. Experienced Engineering Team

Our technical team includes more than 30 specialists, with key technicians bringing over 10 years of industry experience.

From mould structure design to machining, assembly, and trial testing, each stage is coordinated to meet the confirmed technical specifications.

04. Proven International Supply Experience

Our PET preform moulds have been supplied to customers in multiple international markets, including Thailand, Japan, Türkiye, Oman, and Uganda.

Experience across different markets helps us address varying machine configurations, preform specifications, and production requirements.

SZ-MOLDTECH (Jiaxing) Co., Ltd.

FAQ

1. What is the minimum order quantity for a 48 Cavities Preform Mould?

The minimum order quantity is 1 set. SZ-MOLDTECH accepts single-mould orders, allowing customers to purchase according to their actual production requirements without committing to multiple sets.

 

2. What information is required to request a mould quotation?

Please provide the preform drawing, neck finish specifications, preform weight, required cavity number, and injection moulding machine model. If available, machine platen dimensions and existing mould drawings will also help us evaluate compatibility and prepare an accurate quotation.

 

3. Can the 48 Cavities Preform Mould be customized for different preform designs?

Yes. We customize cavity dimensions, preform geometry, neck finish, and mould configurations according to approved product drawings and technical requirements. This allows the mould to match specific bottle designs and production applications.

 

4. Can you manufacture a replacement mould for an existing production line?

Yes. We can evaluate replacement mould projects based on the existing mould drawings, machine specifications, and preform samples. Key dimensions and interface requirements are reviewed before manufacturing to ensure proper installation and operation.

 

 

 

 

Hot Tags: 48 cavities preform mould, China 48 cavities preform mould manufacturers, suppliers, factory, 28mm PCO 1810 Clear PET Preform Mold, 48 Cavity Injection PET Mineral Water Preform Mould, 48 Cavity Preform Mold, 48 Cavity Sprite Bottle PET Preform Mould, PCO 1881 PET Preform Mold, PET Preform Injection Mould 48cav

Send Inquiry
Send Inquiry