48 Cavity Preform Mould For PCO 1810 Neck

48 Cavity Preform Mould For PCO 1810 Neck

48 Cavity Preform Mould for PCO 1810 Neck is designed for high-volume PET preform production with a standardized PCO 1810 neck finish. The 48-cavity configuration provides balanced output and stable cycle performance, while precision-machined cavities help maintain consistent preform weight, neck dimensions, wall thickness, and thread quality. Suitable for bottled water, beverage, and CSD packaging applications, the mould supports reliable production with smooth demoulding and long service life.
Send Inquiry
Description
Technical Parameters

48 Cavity Preform Mould For PCO 1810 Neck

 
48 Cavity Preform Mould For PCO 1810 Neck: Built for Long-Term Production Stability

For high-volume PET preform production, mould performance must remain consistent throughout extended operating cycles-not only during initial commissioning. This 48 Cavity Preform Mould For PCO 1810 Neck is engineered with a focus on long-term dimensional stability, cavity-to-cavity consistency, and controlled maintenance requirements. Critical mould components are precision machined and inspected throughout the manufacturing process, with key dimensions and interfaces verified before assembly and final testing. The optimized hot runner and cooling configuration support stable melt distribution and controlled heat transfer across all 48 cavities, helping maintain consistent preform quality during continuous production. A modular construction allows selected wear components to be serviced or replaced without unnecessary intervention on the complete mould, reducing maintenance time and limiting production losses. The venting structure is designed to release trapped air efficiently and reduce moulding defects such as burn marks. Combined with controlled assembly, inspection, and trial testing at each production stage, the mould is built to provide predictable performance under demanding beverage production conditions, with lower maintenance risk and more controlled downtime over the mould's service life.

 

Key Components of 48 Cavity Preform Mould For PCO 1810 Neck

Key Components of 48 Cavity Preform Mould For PCO 1810 Neck

Key Components of 48 Cavity Preform Mould For PCO 1810 Neck

Key Components of 48 Cavity Preform Mould For PCO 1810 Neck

Key Components of 48 Cavity Preform Mould For PCO 1810 Neck

Get A Custom Solution

 

Why Choose SZ-MOLDTECH for Your High-Performance PET Preform Moulds?

  • Strict Quality Control - Key dimensions, mould interfaces, components, and assembly conditions are inspected at each manufacturing stage rather than relying only on final inspection.
  • High Cavity-to-Cavity Consistency - The mould is engineered to maintain balanced filling and stable preform quality across all cavities, supporting demanding high-volume PET production.
  • Long-Term Production Reliability - The mould structure is designed for extended production cycles, with attention to cooling efficiency, venting, wear control, and maintenance accessibility.
  • Engineering-Focused Customization - Mould design can be developed according to preform weight, neck finish, bottle geometry, injection machine specifications, and production requirements.
  • Controlled Testing Before Delivery - Mould assembly, trial runs, preform inspection, and critical performance checks are completed before shipment to reduce commissioning risks at the customer's facility.

SZ-MOLDTECH

 

Everything you need to know

1. Can the mould be designed according to our existing preform drawing?
Yes. The mould can be engineered from the customer's preform drawing, neck finish, preform weight, length, and bottle application. The gate, cooling layout, cavity dimensions, and mould interfaces can be adjusted according to the confirmed design requirements.

 

2. What PET resin is suitable for this mould?
The mould can be configured for standard PET resin grades used in bottled water, carbonated soft drinks, and other beverage packaging. Resin grade, IV value, additive package, and processing conditions should be confirmed during technical evaluation to ensure suitable injection parameters.

 

3. How do you control preform neck finish accuracy?
The PCO 1810 neck area is manufactured and inspected according to the approved dimensional requirements, including thread geometry, sealing surface, support ring, and critical concentricity features. Inspection records can be used to verify the neck finish before production release.

 

4. Can the mould be integrated with an existing injection system?
Yes. Before mould design is finalized, the injection machine model and relevant interface information are reviewed, including platen dimensions, locating arrangement, ejector configuration, nozzle position, and available mould space. This helps ensure proper mechanical and injection-side compatibility.

 

5. What information is required to quote a 48-cavity PCO 1810 preform mould?
A quotation can be prepared after confirming the preform drawing or sample, target preform weight, cavity number, neck finish, annual production requirement, injection machine model, and any existing hot runner or mould interface requirements. These details allow the mould structure and configuration to be evaluated accurately before pricing.

 

 

 

 

Hot Tags: 48 cavity preform mould for pco 1810 neck, China 48 cavity preform mould for pco 1810 neck manufacturers, suppliers, factory, 28mm PCO 1810 Clear PET Preform Mold, PCO 1810 PET Preform Mold, PET PCO 1881 Preform Mold, PET Preform injection molding, PET Preform Injection Mould 48cav, PET Preform Injection Moulding

Send Inquiry
Send Inquiry